Polytetrafluoroethylene (commonly known as PTFE or Teflon, plastic king, etc.) is commonly referred to as a "non adhesive coating" or "easy to clean material.". This material has the characteristics of resistance to acids, alkalis, and various organic solvents, and is almost insoluble in all solvents. At the same time, polytetrafluoroethylene has the characteristics of high temperature resistance, so it is very suitable for use as a heat exchanger for highly corrosive liquid medicine. The main advantages of using it for heat exchangers are as follows:

Electroplating is carried out at a certain temperature. Generally, increasing the temperature can increase the conductivity of the plating solution, increase the allowable current density for the reaction, and also achieve improved reaction speed and coating uniformity. Now, what are the heating methods used in electroplating plants? The first type of direct heating: Electric heaters such as stainless steel, pure titanium, and Teflon are used to directly heat the tank liquid, with automatic temperature control, no heat exchange temperature difference, and average temperature. Manual lines, continuous plating lines, and other plating plants with small bath sizes and more energy-saving baths for electroplating heating can adopt this method.

The first type of direct heating: Electric heaters such as stainless steel, pure titanium, and Teflon are used to directly heat the tank liquid, with automatic temperature control, no heat exchange temperature difference, and average temperature. Manual lines, continuous plating lines, and other plating plants with small bath sizes and more energy-saving baths for electroplating heating can adopt this method. The second method is indirect heating: through steam or heat pump, through stainless steel heat exchangers, titanium tube heat exchangers, and Teflon heat exchangers placed in the tank, the tank liquid is heated. The temperature controller controls the water pipe, and the switch of the electromagnetic valve controls the temperature. There is a heat exchange temperature difference, which can be used for centralized heating. This method is suitable for electroplating processing plants with large tank sizes such as gantry lines and annular lines.

Polytetrafluoroethylene (commonly known as PTFE or Teflon, plastic king, etc.) is commonly referred to as a "non adhesive coating" or "easy to clean material.". This material has the characteristics of resistance to acids, alkalis, and various organic solvents, and is almost insoluble in all solvents. At the same time, polytetrafluoroethylene has the characteristics of high temperature resistance, so it is very suitable for use as a heat exchanger for highly corrosive liquid medicine. The main advantages of using it for heat exchangers are as follows:

Electroplating is carried out at a certain temperature. Generally, increasing the temperature can increase the conductivity of the plating solution, increase the allowable current density for the reaction, and also achieve improved reaction speed and coating uniformity. Now, what are the heating methods used in electroplating plants? The first type of direct heating: Electric heaters such as stainless steel, pure titanium, and Teflon are used to directly heat the tank liquid, with automatic temperature control, no heat exchange temperature difference, and average temperature. Manual lines, continuous plating lines, and other plating plants with small bath sizes and more energy-saving baths for electroplating heating can adopt this method.